This will be one of my more “meta” posts. Blogging on WordPress discussing blogging on WordPress.
In addition to this blog, my company, UnlimitedViz has a number of active bloggers, The Data Queen, and The Data Model chief among them. We all use WordPress for this purpose, primarily because of its ease of use, and ecosystem of useful add-ins. It’s a PHP application that is (normally) backed by MySQL. UnlimitedViz is a Microsoft shop, so these tools are relatively foreign to us, and Azure is Microsoft’s cloud platform. Notwithstanding that, Azure is an excellent platform choice for us to deploy WordPress, due to its low cost, its WordPress support, and our existing investment in the platform.
I had originally deployed my WordPress blog on Azure back in early 2011 when Azure was really just a rudimentary Platform as a Service product, and wrote about it here. However, I was cheating a little bit, customizing a stateless worker role in as stateless a manner as I could, but it still came back to bite me, and ultimately, I moved my blog over to Rackspace, and then back to Azure, but in an Azure Virtual Machine (IAAS).
When Azure web sites were announced, with direct support for WordPress, I was intrigued. Creating one allows you to create a corresponding, hosted MySQL database (hosted by ClearDB). Unfortunately, each Azure subscription is restricted to a single MySQL DB, and I needed to host multiple blogs with one subscription. I finally got around to looking into this recently, with happy results.
WordPress supports multisite blogs, and the Azure team has some good guidance on how to enable this. However, upon trying this, I quickly determined that this would be a non-starter for us. The WordPress multisite option isn’t supported by some plugins, requires a single master administrator, and requires that all blog owners use the same set of plug ins. Now if there is one word that could describe every UnlimitedViz team member, it’s independent.
What I needed was a way to support multiple WordPress instances with one subscription, one database, and a minimum of administrative overhead. Luckily it’s relatively easy. The trick is to use different table names in the MySQL database for each blog. Below is a step by step example of how to do this.
To begin, all of our blogs are domain oriented, not path oriented. As an example whitepages.unlimitedviz.com vs blogs.unlimitedviz.com/whitepages. In this example we’ll add a new blog with the URL newblog1.unlimitedviz.com to our Azure subscription. The process for creating the first blog is identical to the addition of a new one, with the exception that a new database is created instead of connecting to an existing one.
Step 1 – Add a new Azure Web Site
From the Azure management portal, navigate to Web Sites, select New, Web Site, From Gallery.
Scroll down to the bottom of he gallery, and find WordPress. Select it, and press the next arrow.
Next, fill in the information about your new blog. The deployment settings will be used by PHP to communicate with MySQL, and will be largely invisible after initial setup. Your new blog will also have a .azurewebsites.net domain. We will substitute (or add) our own later. For now, our new blog will be newblog1.azurewebsites.net, will use an existing database, live in the North Central US data center, and use our corporate subscription.
When ready, click the next arrow. If I was creating the first (and only) database, I would be able to give it a name and create it here. As it is, we can select our existing database, agree to ClearDB’s terms of service, and select the “done” check mark.
At this point, the web site will be created. Once done, it is possible to navigate to the URL, and set up WordPress, but we need to make an additional modification first.
Step 2 – Specify the Table Prefix
In order to tell this particular WordPress instance which tables to use in the database, we need to modify the wp-config.php file in the web root. How do we do this? We have a few options. We could use FTP to download the file, edit it, and send it back up (FTP settings are under the Dashboard tab for the web site).
We could also use GIT, but as I’m unfamiliar with it, I’ll let more GIT friendly folks sort that out as they wish. My preferred option is to use Webmatrix, which allows the direct editing of Azure Web Sites. Webmatrix is available from the bottom tools ribbon wherever a web site is selected.
If Webmatrix has already been installed, it will launch, and if not, you’ll need to install it first. Your first option will be its operation mode, either direct, or off-line. We will select direct.
Next, we double click on the wp-config.php file. This will open it in the editor. Now we scroll down to the line for $table_prefix, and edit it as appropriate, in our case “newblog1_”.
Finally save the file and close Webmatrix. Now when the WordPress configuration wizard is run, it will create table in the database that are prepended with “newblog1_”, and use them thereafter. The configuration wizard runs whenever WordPress can’t find the specified tables in the database
Step 3 – Configure WordPress
Next, we navigate to our URL, where the WordPress configuration wizard will go ahead and complete our setup. In our case, we navigate to newblog1.azurewebsites.net, and fill out the form.
When ready, click on the “Install WordPress” button. Once done, we log in and start building out the blog. That’s really all there is to it from the blog perspective. However, there’s likely one more important thing that we need to do.
Step 4 – Activate Your Own URL
In all likelihood, you don’t want to use azurewebsites.net in the domain of your new blog. We could use a DNS alias on our DNS to reroute traffic, but Azure won’t answer any requests that it isn’t expecting. We must first register our custom domain with the Azure web site, and this is only possible with Shared or Standard web sites. New sites get created in free mode, so we need to first switch the compute mode. Keep in mind that we’re switching away from free, so charges will accrue.
To switch modes, from the Azure Management Portal, click on the web site in question, then click the Scale tab. Under general, select on either “Shared” or “Standard” (shared is cheaper), and click save at the bottom of the screen.
Once you accept the disclaimers, the mode changes, and we can add our domain. However, before we do, we need to make a DNS change. Azure won’t allow you to add just any domain, it needs to know that you own it. To do so, you need to add an alias (CNAME) entry that points from a verification subdomain (awverify) to a verification subdomain of our web site. In our case, the entry is awverify.newblog1.unlimitedviz.com and it points to awverify.newblog1.azurewebsites.net.
Honestly, this is the biggest pain of the entire exercise. The effect of the change is not immediate, and after making the change, you may want to take a break for a while. According to the UI, there are also apparently other aliases that can be used for this purpose, but this is what works for me.
At this point, we can add the domain to the Azure web site. To do so, we open the Azure admin portal, and open the definition for the web site. Next, we click on the Configure tab, scroll down to the domain names section, and click the “manage domains” button.
In the dialog that pops up, enter your custom domain name
If your verification alias was properly set up, and all is well, you will receive a green check mark status indicator. If not, it will be a red x, and you will need to fix the problem. It could be a misspelled name or just no verification result. However, if all is well, make note of the IP address for your A records, and click the check button to save the configuration.
Finally, we add an A record to our DNS that points our custom domain newblog1.unlimitedviz.com to the IP address noted just above.
That’s it. Taking this approach, we can have multiple, independent WordPress blogs sharing a single Azure subscription and a single MySQL database.
This is the current setup for all of the UnlimitedViz blogs. There are, however a couple of caveats, that you should be aware of.
Once you go ahead and allow WordPress to run its configuration wizard, it creates its table in the database. If you remove the web site, the underlying tables remain in the databases. This is either good or bad, depending on your perspective. If your website gets deleted, the data persists, and its simple to connect back to it, just like SharePoint. However, if you need to clean out the database, it’s pretty much impossible.
Thus far, I haven’t found any good way to manage the database directly. However, I haven’t looked very hard, as I haven’t needed to, and that’s a good thing.
The one thing that you should certainly be aware of if you’re going to be doing this to any sort of scale, is that the MySQL database that is created automatically is restricted to 20MB of total size, and that’s a limit that you will run into fairly quickly. I certainly never saw any indication of this limit while I was building the environment, but then, I never read any of the terms and conditions. Really, who does? The good news is that it can be upgraded.
The day after moving our blogs to this platform, I received an email from ClearDB stating that I was near my storage limit, and should consider upgrading. The email didn’t indicate how this could be done, so I navigated to the ClearDB site. Since there was a login button I used it, and entered the email that I use for my Azure subscription. Unfortunately my password didn’t work. Creating a MySQL database creates a ClearDB account, but I have no idea what password it uses. Using the “Lost Password” worked, but I was still unable to log in. Finally, I logged a support issue with them using the provided support form. Very quickly, my account was enabled for “direct login” which is what was necessary, and allowed me to upgrade the database to a greater capacity. The plan that I opted for was $9.99/month, and allows up to 1 GB of space, which is plenty.
There was one other bump that I had to overcome. I was migrating existing blogs, and to do so, I used the export and import features that are a part of WordPress. The export feature downloads an XML file with all of your blog content. Supporting images are not included (they are downloaded at import time), but the file can still be rather large. The first step in the import process uploads the XML file, and then brings it back into the database. The problem is that by default, the maximum upload size for WordPress is 2MB, and I had two that were larger.
The way to get past this is to increase the maximum upload size. In Azure, this can be done through the addition of a configuration file in the web root. The file needs to be named “.user.ini”.
Open your web site using WebMatrix, right click on the site name, and select “New File”. Select TXT as the type, and name it “.user.ini”. Double click on it to open, and add the following line to it:
upload_max_filesize = 50M
After saving, you should be able to upload files up to 50MB. It may be necessary to restart the site through the admin portal.
I’ve been quite liking the performance and the stability of this new setup, and I recommend it highly for this sort of requirement.
Using Multiple WordPress Blogs with Azure Web Sites | The White … – хороший пост, спасибо
This is exactly what I was wanting to find out. Thank you for the detailed post!
Do you know if it is possible to create multiple wpordpress sites using the same database? I mean, the free one is only 20Mb, but the next is 1Gb and it is only 10 dolars. So it looks like a good way of saving mony and improving the cloud usage. 20 Mb is just too low and 1Gb is just to high for some kind of blogs
This was so useful, exactly what I was looking for. Thanks!
[…] So if you have any images on the blog you blow this free limit. Now if you would like to run multiple WordPress blogs on azure web sites using the one free database it is possible but not very […]
[…] ref: 1 […]